EV Charger Installation
Charge at home, on your terms. A Level 2 home EV charger is one of the most practical upgrades a Houston homeowner can make right now. Forget public charging queues. Plug in when you get home, wake up with a full battery.
Charge at Home, on Your Terms
Whether you drive a Tesla, a Rivian, a Chevy Blazer EV, or anything else, LCF Electrical installs the right charger for your vehicle, your garage, and your panel.
We handle everything — permit, installation, and inspection — across The Woodlands, Conroe, Spring, Tomball, Magnolia, Houston, Katy, Cypress, Humble, and surrounding areas.
Level 1 vs Level 2: What You Actually Need
Level 1 (standard outlet, 120V)
Adds roughly 4-5 miles of range per hour. Fine for plug-in hybrids. Not practical for a full EV as a daily driver.
Level 2 (240V dedicated circuit)
Adds 20-30+ miles of range per hour depending on your vehicle's onboard charger. This is what most EV owners need, and what LCF installs.
What the Installation Covers
We install all major brands including Tesla Wall Connector, ChargePoint Home Flex, Enel X JuiceBox, Grizzl-E, and universal J1772-compatible units.
Assessment
Assessment of your existing panel capacity and available circuits.
Recommendation
Recommendation on charger brand and placement.
Circuit Installation
Installation of a dedicated 240V, 50-amp circuit from panel to charger location.
Mounting
Mounting of the EVSE (Electric Vehicle Supply Equipment) unit.
Weatherproofing
Weatherproofing for garage exterior or outdoor installations.
Permits & Inspection
All permit applications and city inspection scheduling and attendance.
If you already have a charger picked out, we will install it.
Permits and Compliance
The City of Houston requires an electrical permit for all EV charger installations. LCF Electrical applies for and manages this permit on your behalf. The permit specifies the EVSE type, and the installation must pass a city inspection before the job is considered complete.
All work meets the requirements of NEC Article 625, which governs electric vehicle charging systems. Key requirements include:
- Dedicated branch circuit for the EVSE
- Proper grounding and bonding
- GFCI protection where required
- Correct wire sizing for continuous load calculations (EV chargers are treated as continuous loads under the NEC, meaning the circuit must be sized at 125% of the charger's rated amperage)
All installations are performed by TDLR-licensed electricians under License #41252.
Federal Tax Credit: Act Before June 30, 2026
The 30C federal tax credit currently covers 30% of the cost of a home EV charger installation, up to $1,000. This credit is scheduled to expire on June 30, 2026. If you have been thinking about adding a home charger, now is a good time to move forward. Speak with your tax advisor about whether you qualify.
Do You Need a Panel Upgrade First?
Possibly. A Level 2 EV charger on a 50-amp circuit draws meaningful load. If your home is running a 100-amp service, or your current 200-amp panel is already near capacity, you may need a panel upgrade before the charger can be safely installed. We assess this during every quote visit.
Frequently Asked Questions
Get a Fixed-Price Quote
No hourly estimates. No surprises. You will know the full cost before we start.
Call Us Directly
Available 24/7 for emergencies
Address
Service Area
The Woodlands, Conroe, Spring, Tomball, Magnolia, Montgomery, Houston & surrounding areas
